Connect to your speakers (wired)

1：Streaming player or preamplifier → Active speaker/amplifier [VANGOA-P30]

Select cable: RCA (red/white), 3.5mm AUX, or optical cable.

Connection method: Streaming output → Speaker/amplifier input.

Select the amplifier input (if applicable). Test the audio and adjust the volume.

Prepare a cable with a banana plug (10-18 AWG).

Connect the speaker terminals: Red = +, Black = –.

Connect to the amplifier output.

Connect securely. Power on and test the audio.

Strip the insulation from the cable end and insert it into the Phoenix connector.

Tighten the screws to secure the cable.

Connect the Phoenix module to the amplifier terminals (red = +, black = -).

Check the connection. Power on and test the audio.

Always maintain consistent polarity: Red = +, Black = –.

Keep connections tight and secure.

Avoid cable tangling and interference.

Gradually increase volume to protect speakers.